Invitation to Tender
Detailed Solutions

Moisture and Thermal Insulation

Moisture and thermal insulation: A very low OHTC of <0.12 W/m²*K can be achieved using thermal consoles which heat bridge-free. BEMO roof systems are designed individually to meet the needs of the building. Depending on the type of insulation package, BEMO façade systems achieve thermal transmission values of <0.12 W/m²K.

Moisture and Thermal Insulation

The material used in the substructure are an important factor in thermal insulation. It should have a very low thermal transmission value. Frequently used materials such as aluminium with min. 160 W/(m*K) and steel with 50 W/(m*K) have very high thermal transmission values and should be kept to the absolute minimum. We use a substructure with very low thermal transmission value in order to achieve the best results. Our BEMO thermal consoles with a thermal transmission value of 0.35 W/(m*K) create practically no heat bridges. This has very little influence on the function of the insulation layer and improves thermal insulation performance by up to 75%.

In the case of very high thermal insulation requirements, we recommend back-ventilated curtain façades (VHF) with the largest possible percentage of soft insulation using non-thermally conductive BEMO thermal consoles.

A back-ventilated curtain façade offers the perfect solution to moisture protection. The back-ventilated layer leads off moisture, which can diffuse through the assembly by diffusion, safely and permanently; precipitation can also penetrate the façade cladding joints.

We will be happy to carry out all calculations and verifications for moisture and thermal insulation, above all for “climate-critical” buildings. 


We will be happy to provide you with detailed information on our products, systems, colours and prices.
Should you require further information, please do not hesitate to contact us.



Click here for more information

Tender Quotations

Click here.