Very low OHTC values of up to 0.12 W/m²*K can be achieved cost effectively for all roof shapes using individual BEMO roof structures.
BEMO roof systems are designed individually to meet the needs of the building.
Depending on the type of insulation package, BEMO roof systems achieve thermal transmission values of <0.12 W/m²K.
The materials used in the substructure are an important factor in thermal insulation. They should have very low thermal transmission values. Frequently used materials such as aluminium with min. 160 W/(m*K) and steel with 50 W/(m*K) have very high thermal transmission values and should be kept to the absolute minimum in production. In order to achieve the optimum result we use a substructure with very low thermal transmission values.
Our GRP holders with a thermal transmission value of 0.35 W/(m*K) create practically no heat bridges. This has very little influence on the function of the insulation layer.
In the case of very high thermal insulation requirements, we recommend roof structures with the largest possible percentage of soft insulation using non-thermally conductive BEMO FRP holders.
Moisture protection is an important issue in every building and should always be given special attention.
We will be happy to carry out all calculations and verifications for moisture and thermal insulation, above all for “climate-critical” buildings such as skating rinks or refrigeration buildings.
We will be happy to provide you with detailed information on our products, systems, colours and prices.
Should you require further information, please do not hesitate to contact us.